Vacuum insulation panels
Back to Products
VIPs (vacuum insulation panels) are highest-performance thermal insulation products based on a porous core material that is integrated into a special foil and evacuated. With VIPs, thinnest and most powerful thermal insulation becomes possible.
va-Q-vip F
Application: Thermal superinsulation
va-Q-vip F is a microporous VIP based on fumed silica. va-Q-vip has been certified by the German certification body Deutsches Institut für Bautechnik (DIBt) for construction applications.
va-Q-vip F VIPs enable extremely space-saving thermal insulation layers or highest energy efficiency ratings.
va-Q-vip F VIPs are produced with patented foil folding technology providing smooth edges and corners (va-Q-seam). For this reason, va-Q-vip F VIPs can be arranged into the desired pattern without any gaps. Typically, rectangular VIPs are produced and complemented with other thermal insulation materials but special shapes (trapezoid, triangular, cut corners) are also available on request.
For special requirements va-Q-vip F is available with one- or double-sided facings of XPS (va-Q-vip F XPS) or rubber granulate (va-Q-vip F GGM) in 3 mm thickness.
Highlights
Maximum useable space or highest energy efficiency due to extremely slim thermal insulation of the highest available performance.
Long lifetime of up to 60 years due to optimized VIP design.
Directly useable due to construction certifications Bauaufsichtliche Zulassung Z-23.11-1658 and ETA-17/0926 (DIBt).
Smooth edges due to patented va-Q-seam technology.
100% quality control of shipped VIPs with patented digital remote pressure sensing technology (va-Q-check).
A wide range of standard sizes.
Sustainable product with recyclable core material
Typical properties
Thermal conductivity (EN 12667, 10°C, upon shipping, thickness ≥ 15 mm): ≤0.0043 W/(m*K)
Thermal conductivity (certification value incl. ageing, edge effects, thickness ≥ 20 mm): 0.007 W/(m*K)
Thermal conductivity ventilated (certification value incl. ageing, edge effects): 0.020 W/(m*K)
Compressive strength (DIN EN 826): ≥ 180 kPa bei 10% (≥ 150 kPa for product GGM)
Density (EN 1602, thickness ≥ 20 mm): 180 - 210 g/l
Fire class (DIN EN 13501-1): E
Lifetime: Bis zu 60 Jahre
Standard sizes: 1000 x 600, 1000 x 300, 600 x 500, 600 x 250, 300 x 250 mm
Available thicknesses: 10 - 60 mm (in 5 mm steps)
va-Q-vip Floor
Application: Thermal superinsulation
va-Q-vip Floor - like va-Q-vip F - is a microporous VIP based on fumed silica that has been certified by the German certification body Deutsches Institut für Bautechnik (DIBt) for construction applications.
va-Q-vip Floor is covered with a 17 mm thick layer of PIR rigid foam (polyisocyanurate) on the lower side. With this multi-layer setup, the vacuum panel core is optimally protected for especially demanding construction environments.
Highlights
Like va-Q-vip F, with additional protective layer for improved mechanical resistance.
Typical properties
Like va-Q-vip F
Compressive strength (DIN EN 826): ≥ 150 kPa bei 10%
Standard sizes: 1000 x 600, 1000 x 300, 600 x 500, 600 x 250, 300 x 250 mm
Available thicknesses: 40; 50; 60 mm
va-Q-shield VIP C
Application: Thermal superinsulation
va-Q-vip shield VIP C - like va-Q-vip F - is a microporous VIP based on fumed silica that has been certified by the German certification body Deutsches Institut für Bautechnik (DIBt) for construction applications.
va-Q-vip shield VIP C is covered with a protective, fire-resistant fabric to achieve a higher fire rating in the application.
Highlights
Like va-Q-vip F, with additional protective envelope for improved fire resistance.
Typical properties
Like va-Q-vip F
Fire rating (EN 13501-1): B-s1,d0
Compressive strength (DIN EN 826): ≥ 150 kPa bei 10%
Standard sizes: 1000 x 600, 1000 x 300, 600 x 500, 600 x 250, 300 x 250 mm
Available thicknesses: 20 - 60 mm (in 5 mm steps)
Zurück zu Produkten